SOUL Performance Exhaust System - Porsche 991.2 Carrera (Base / S)

Now available at 911 Design — the SOUL Performance Exhaust System for Porsche 991.2 Carrera and Carrera S models. Professional installation also available at our Montclair, CA facility.

The non-PSE equipped 991.2 exhaust system is far too quiet from the factory. The Soul Performance Products rear exhaust increases much needed tone while minimizing drone with available anti-drone tubes for a more invigorating driving experience.

DETAILS
+  Fits base Porsche 991.2 Carrera vehicles without Porsche Sport Exhaust / PSE (2017+)
   * Base models must use OEM tips if running factory cats.
   * S models must use base model dual tips with factory cats OR SOUL tips with SOUL catalytic converters / cat bypass pipes (purchase separately). Not compatible with S model tips.
+  Weighs .65  lbs / .3 kg less than factory exhaust components (16.7 lbs w/ antidrone tubes vs 17.35 lbs factory)
+  Designed and built in-house at SOUL Performance's Willow Grove, PA facility
+  All SOUL Performance Products components are backed by a renowned Lifetime Warranty for both street and track use

DEVELOPMENT AND TESTING:  We set out to craft a rear exhaust that was simple, light, and as aggressive as possible while retaining drivability. The 991.2 non-PSE equipped cars are prone to droning in the 1,800-2,200 RPM range with aftermarket exhausts – the primary factor that we based our system around. We tested numerous variants incorporating resonators, helmholtz resonators / anti-drone tubes, straight pipes, and a basic x-pipe to hone in on the best possible solution. Testing was done with and without our Sport Catalytic Converters as they are a very common modification. Resonators reduced the overall engine tone and volume and did not have enough of an impact on the drone. Helmholtz resonators (also known as anti-drone tubes) are an effective way to reduce undesirable frequencies when engineered and utilized correctly. Our final design has proven to offer the very best results on this application and achieved our high standards for sound quality and drivability. Looking for the most aggressive sound and lightest weight? We also offer the system without anti-drone tubes for a lighter, more cost effective solution – the exterior volume and tone is the same minus the reduction in drone.

CONSTRUCTION:  Each system is proudly handcrafted in house in the USA out of mandrel bent, thick wall .065″” T304L stainless steel. Back purged TIG welding (with ARCAL™ Prime argon gas) ensures proper weld penetration for exceptional strength and longevity. Water jet cut flanges are made to ISO 9001:2015 standards with ultra-tight tolerances of +/- 0.003 inches for extreme precision. We fabricate the exhaust system using thick-gauge aluminum fixtures that act as a heat sink during the welding process to prevent any warping.

Many of our products are built to order and/or shipped directly from the manufacturer to ensure authenticity and quality. After your order is placed, our team will promptly confirm availability and provide an estimated delivery timeframe. If you have any questions regarding product selection or your order status, please do not hesitate to contact us.